Thermal Flowmeter
Smart Measurement - SMC ATMF
- Process Connection : Threaded, Flanged
- Housing protection : NEMA 4,Class 1, Div 1, Groups B, C, & D
- Process temperature : 149°C (300°F)
- Ex-protection : II 2 GD EEx d IIC T2 or T3
- Operating pressure : 69 Barg (1000 PSIG)
- Mass Flow rate : See model selection guide section Cable (remote version) : 300 meters
- Flow units : Kg/hr., Kg/mn, Kg/s Lb.\hr., Lb./m Lb./s
- Wetted materials : 316 SSS (Hastelloy, etc.. ) NCMH, SCFM, NLPM, SLPM weight (approximate) : Mt/s, F/mn, BTU/Hr., BTU/min
- Integral Type :¼" to 1" 1 to 4 Kg (2.2 - 8.8Lb)
- Gas temperature effect : 0.01% /° C
- Accuracy (and linearity) : ±[1% of Reading + (.5% FS)] 1¼" to 2½" 2-3 Kg (4.4 - 6.6Lb) ± 0.2% of Full Scale 3 and 4" 4-5 KG (8.81 - 22Lb)
- Repeatability : ± 0.25% of Full Scale
- Turn down ratio : Over 100:1
- Response time : Less than one second
- Material : 316SS as per DIN 1.4571 (AISI 316 Ti)
- Linear signal output : 0-5 VDC & 4-20 mA
- Remote Type : Pulse output : scalable ¼" to 1" 3 to 6 Kg (6.6 - 13.2 Lb.)
- Relays : Two 1-amp, SPDT 1¼" to 2½" 6-8 Kg (13.2 - 17.6 Lb.)
- User-selectable alarm functions 3" and 4" 8-10 KG (17.6-22 Lb.)
- Display units : Flow, Total flow, Switch settings Temperature, Elapsed time
- RAM Back-up : Lithium Battery Notes:-weight +0.5 kg (1 Lb.) for 150# flanges + 1kg (2.2Lb) for 300#
- Data storage : EPROM storage up to 10 years
- Power requirements : 115VAC @, 1/8 A 230VAC @ 1/16 A 24 VDC @ 1/4A Power Consumption : 2 Watts or less Signal Interface : RS232 & RS485, MODBUS,etc..
- NIST traceable : Standard for all calibration